ComAp ECON-4 User Manual

ECON-4 1.4.0 Global Guide
52
Setpoint group Engine RPM Related FW 1.4.0
Range [units] Start RPM - Nominal RPM
Default value 50% Force value NO
Step 1 %
Comm object 7173 Related applications ALL
Setpoint visibility Always
Description
Maximum position of the actuator during start.
MaxStart dose
6 back to List of setpoints
Setpoint group Engine RPM Related FW 1.4.0
Range [units] Start RPM - Nominal RPM
Default value 10 s Force value NO
Step 1 s
Comm object 7174 Related applications ALL
Setpoint visibility Always
Description
Time the actuator needs to move from the InitStart dose to MaxStart dose.
Fuel ramp time
6 back to List of setpoints
Setpoint group Engine RPM Related FW 1.4.0
Range [units] Start RPM - Nominal RPM
Default value 10 s Force value NO
Step 1 s
Comm object 7175 Related applications ALL
Setpoint visibility Always
Description
This setpoint defines speed of ramp from Starting RPM to Idle RPM. It is directly the time of ramp from.
RPM StartRamp
6 back to List of setpoints

ComAp ECON-4 Specifications

General

Brand	ComAp
Model	ECON-4
Category	Controller
Language	English