To Next PageTo Next Page
Need help?Do you have a question about the ComAp IL-NT and is the answer not in the manual?
General| Model | IL-NT |
|---|---|
| Certifications | CE, UL |
| Communication Protocols | CAN |
| Display | LCD |
| Inputs | Digital |
| Outputs | Digital |
Explains notation types like IMPORTANT and WARNING for procedures and information.
Provides information about the scope of the guide, covering extension modules for specific controllers.
Details the license agreement, terms, and conditions for using ComAp products and documentation.
Recommendations for securing access codes and passwords to protect ComAp devices.
Guidelines for securely using the controller's web interface, emphasizing private network usage.
Security advice for MODBUS/TCP, highlighting its use in closed networks due to lack of encryption.
Security advice for SNMP, noting its unencrypted nature and intended use in closed networks.
Details the I-LB+ communication module, including its description, connectors, settings, LEDs, wiring, and technical data.
Covers the i-LBA module for power supply backup during cranking, detailing its description, connectors, wiring, and technical data.
Describes relay boards with 8 or 16 relays for output separation, including specifications and applications.
Explains the IG-IOM I/O extension module with binary and analog inputs/outputs, its dimensions, terminals, and technical data.
Details the IGS-PTM module, a modification of IG-IOM with configurable analog inputs for various sensor types.
Covers voltage transformer units for galvanic separation between generator/mains and controllers, including specs.
Describes the IL-NT-AOUT8 analog output module providing eight PWM outputs for driving analog gauges.
Details the IL-NT-RS232 module, an optional plug-in card providing an additional serial interface for controllers.
Explains the IL-NT-S-USB module, an optional plug-in card offering an additional USB interface for controllers.
Covers the IL-NT-FCM fuel counter module for reading rectangular signals and evaluating fuel consumption.
Describes the IL-NT-RS232-485 module with dual RS232 and RS485 interfaces on independent COM channels.
Details the IL-NT-BIO8 module, providing 8 binary inputs or 8 binary open collector outputs configurable via PC tool.
Explains the IC-NT-CT-BIO7 module with AC current input and up to 7 binary I/O, configurable for mains current measuring.
Covers the IL-NT-IO1 module for driving proportional valves and providing additional binary inputs.
Details the IL-NT-AIO module offering four analog inputs and one analog output, configurable for various sensor types.
Describes the Inteli RPU (Redundant Protection Unit) for marine applications, ensuring basic functionality during main unit failure.
