EasyManua.ls Logo

ComAp IL-NT - IG-MTU Voltage Transformer Units

ComAp IL-NT
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Accessory Modules for IL-NT, IC-NT, IA-NT and ID-Lite Global Guide
33
4.6 IG-MTU/IG-MTU-C/MTU-2-1
4.6.1 Description
Voltage transformer unit, for three wire system, system with separated Neutral or when galvanic separation
between generator or mains voltage and controller is required.
IG-MTU with voltage ratio 1 : 1, conversion accuracy ± 1.5%, phase shift ±
IG-MTU-2-1 with voltage ratio 2 : 1, conversion accuracy ± 1.5%, phase shift ±
IG-MTU-C with voltage ratio 1 : 1, conversion accuracy ± 3%, phase shift ± .Additional filter for the
cases of extreme distortion of generator voltage by higher harmonics due to inverters etc.
4.6.2 Connectors
IN Input voltage
OUT Output voltage
4.6.3 Wiring
Connect one or two IG-MTU units to separate generator and Mains/bus voltage from controller.

Related product manuals