Accessory Modules for IL-NT, IC-NT, IA-NT and ID-Lite Global Guide
16
Modbus communication via I-LB+
To use I-LB+ modbus communication connect Modbus jumper in I-LB+ unit. Additionally, you can choose the
communication speed using the speed selection jumpers. Their combination allows the speed selection of
9600/19200/38400/57600 bps. Modbus is not supported via USB interface.
4.1.6 Technical data
Dimension (W×H×D) 95×96×43 mm (3.7´×3.8´×1.7´)
Interface to controller CAN
Interface to modem or PC RS232, RS422, RS485, USB only I-LB+
Power supply 8 to 36 V DC
Analog outputs refreshment Max. 300 ms
Current consumption 100mA at 24 V
Storage temperature - 40 °C to + 80 °C
Operating temperature - 30 °C to + 70 °C
6 back to I-LB+
To Next Page
Loading...
