ComAp IL-NT - Page 61

Accessory Modules for IL-NT, IC-NT, IA-NT and ID-Lite Global Guide
61
RPU
RPU LEDs are used for indication of RPU functionality
Green LED Lightening when the RPU is operational
Red LED Lightening if the RPU has power but is NOT operational
No LED Lightening if the RPU is NOT connected to power supply
ENG
LEDs are used for indication in case the RPU is controlling the engine while InteliDrive
Marine failure
Green LED Lightening when the engine can be started
Red LED Lightening when RPU is stopping the engine
Example of wiring
For correct functionality of Inteli RPU shall be connected
Inputs
Secondary RPM
Emergency stop button
Controller
↓FR (Fault reset) – binary output from InteliDrive Marine unit configured as Fault Reset
↓WD (Watch Dog) – binary output from InteliDrive Marine unit configured as CtrlHeartBeat
↑RPU – Binary input of InteliDrive Marine unit with configured Warning protection to indicate RPU
failure