InteliLite Global Guide
50
Controller Address (page 161) has to be set to the same value as in the PC tool
IP Address Mode (page 332) can be set to AUTOMATIC when there is DHCP service is available. Otherwise
it needs to be set to FIXED
IP Address (page 332) is either set automatically or it can be adjusted to a specific requested value
Subnet Mask (page 333) is either set automatically or it can be adjusted to a specific requested
Gateway IP (page 333) can be set here when it is used
AirGate Connection (page 337) has to be set to Enabled
AirGate Address (page 337) currently there is one AirGate server running at URL airgate.comap.cz (enter this
URL into the setpoint)
Connection using LiteEdit2015
Image 5.10 First screen of LiteEdit2015 - select connect to controller