EasyManua.ls Logo

Commend GE 800 - IP-Subscribers with Configured Passwords; Reset to Factory Default

Commend GE 800
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GE 800 7. Configuration of IP-Terminals
1.1/1209 43
IP-subscribers with configured passwords
When receiving the configuration of subscribers with configured passwords, red dots are indicated
in the column Password.
For these IP-stations / IP-boxes only the MAC-address is indicated.
If the correct password is entered in the column Password, it is indicated with green dots. Addi-
tionally the configuration of the device is displayed and can be changed and sent.
Note: A maximum of 126 digits can be stored for the password.
Reset to factory default
It is possible to reset the configuration of the IP-subscriber to the factory default.
Note: It is only possible to reset the IP-device when the connection to the Intercom Server is not up-
right (“offline” – a red cross is indicated in the column “Online”).
Select Set Factory Default (Reset) in the menu Station. An acknowledgement dialogue is dis-
played.