Need help?Do you have a question about the Commend GE 800 and is the answer not in the manual?
Details the contents included with the Intercom Server GE 800.
Lists components required for system setup besides the main server.
Provides steps for mounting hardware and installing components.
Explains how to connect the Intercom Server and terminals.
Covers activation and management of software licenses.
Details the setup process for IP-based terminals.
Overview of necessary components for Intercom Server startup.
Cards for speech communication and subscriber-specific functions.
Enables connection of VoIP phones and systems as subscribers.
Used for reading floating contacts and operating controls.
For integrating external systems like telephones and PCs.
For connecting and networking Intercom Servers via LAN/WAN.
Boards for connecting plug-in cards to terminals and interfaces.
Expand functionality of the Intercom Server and plug-in cards.
Details on pre-installed cards and handling precautions.
Table showing available slots for various plug-in cards.
Wiring diagrams for the Intercom Server connections.
Wiring details for the G8A-GEN installation board.
Wiring details for the G8A-NET installation board.
Wiring diagram for the G8A-C board connecting 4 subscribers.
Details on using patch panels for subscriber connections.
Details on the G8-NET card for server networking.
Illustrates options for connecting multiple servers with/without a switch.
Requirements for VLAN-capable switches when networking servers.
Notes on potential connection issues with autonegotiation.
Specific restrictions for GE 800 systems in mixed configurations.
Requirements for GE 700 network cards in mixed systems.
Notes on synchronous connection limitations.
Methods for configuring the Intercom Server via network or serial.
Details on networking multiple server housings.
Overview of licensing for additional features and protection.
Benefits of using licenses for cards and software.
Area to manage available licenses before allocation.
Lists all Intercom Servers in the project for license allocation.
Shows detailed view of cards and allocated licenses.
Minimum hardware and software requirements for IP-terminal configuration.
Configuration settings for the G8-IP card in CCT.
Maximum expansion capabilities for subscribers and I/O.
Maximum cable lengths for subscriber lines.
Cable length specifications for digital station types.
Line length data for EE 411 stations with and without display.
Details on internal and network-based conversation limits.
Conversation limits when using G8-NET connections.
Conversation limits between GE 800 and GE 700 via G8-NET.
Conversation limits for G8-CNET-E1 connections.
Conversation limits for G8-CNET-W connections.
Conversation limits for LAN/WAN networked systems.
Technical specifications for the GE 800 housing.
Technical specifications for the G8-GEN power supply card.
LED indicators and their meanings for the G8-GEN card.
LED indicators and their meanings for the G8-GEP card.
LED status indicators for the RUN function of G8-NET.
LED status indicators for the LAN connection of G8-NET.
Description of IP subscriber cards and their features.
Description of digital subscriber cards and their features.
Description of analog subscriber cards and their features.
Details of the card with 8 inputs and 8 relay outputs.
Details of the card with 16 relay outputs.
Details of the card with 16 inputs.
Illustrates IP addressing schemes and subnetting.
To Next Page
General