Commend GE 800 - Quick Start Guide; Extent of Supply; Additional Components; Assembly of Components

GE 800 Quick Start Guide
1.1/1209 5
Quick Start Guide
The Intercom Server GE 800 has been designed to meet the internal communication demands of large
companies and organisations. Different functions of modern internal communication such as intercom,
information and control can be integrated into a single system. By means of different subscriber cards
with different feature levels and additional interfaces the central can be adapted to the individual needs
with ease.
This manual describes mounting of the hardware and start-up of the Intercom Server, Subscriber In-
terfaces and Input/Output cards. Information about the interface cards and Intercom Terminals can be
found in the respective Manuals of the products.
The following steps are required for Start-up:
This manual is split into the following areas:
1. Extent of Supply
2. Additional components
3. Assembly of the components
4. Cabling
5. CCT Configuration
6. Licensing
7. Configuration of IP-Terminals
Installation of plug-in cards
and installation boards
Connection of
Intercom Terminals
Activation of
Licences
Configuration of:
- Features
- IP-Terminals
- Networks
Connection of
additional Servers
(only in networked systems)
Configuration of Server-IDs
and IP addresses
(only in networked systems)