7. Configuration of IP-Terminals GE 800
42 1.1/1209
Saving a configuration
It is possible to save the configuration in a XML-file.
In the menu File select Save XML-Settings or click on the button Save. A window for selection of
the desired folder is displayed.
It is also possible to export the configuration as XLS-, TXT- or HTML-File.
In the menu Station – Export Settings select the respective entry:
To EXCEL
To HTML
To TXT
Loading a configuration
When a XML-configuration is loaded while a configuration is currently open, it is possible to merge
these two configurations. The following dialogue appears:
If merging is selected, the fields, which are overwritten are highlighted red.
Passwords for subscribers
In order to prevent unauthorized use it is possible to advise individual passwords for the IP-Terminals.
Without this password it is neither possible to send a configuration to the device nor read out the cur-
rent configuration.
Set password
Set a password for single/multiple subscribers:
Select the desired subscriber(s) in the table (multiple selection with <Ctrl> and <SHIFT>).
Select: Menu Station > Set password
The following dialogue appears:
Enter the new password in the field New Password.
Confirm the new password in the field Confirm Password.
To Next Page
Loading...