Compaq 247320-003 - Deskpro 4000 - 5166 Model 2500/CDS - Installing an Expansion Board; Removing an Expansion Slot Cover

Reference Guide 6-19
Writer: Debbie Thomson Saved By: Alyce Klingler-Castle Saved Date: 06/13/97 5:32 PM
Pages: 37 Words: 5251 Template: c:\msoffice\templates\comm.dot
File Name Ch6.doc Part Number 270844-002
Installing an
Expansion Board
Your computer contains expansion slots, as follows:
Expansion Slots in Pentium-Based Expansion Board Cage
Expansion Slots in Pentium IIBased Expansion Board Cage
1 PCI (Peripheral Component Interconnect) expansion slots
2 PCI/ISA shared expansion slot
3 ISA (Industry Standard Architecture) expansion slots
✎
The graphics controller resides in either a PCI slot in the
expansion board cage, or in the AGP slot on the system
board.
Removing an Expansion Slot Cover
To remove an expansion slot cover, follow these steps:
1. Remove the expansion board cage from the computer
chassis.
2. Locate the correct vacant slot in the expansion board cage.