7-6 Upgrading the Minitower Computer
Writer: Your Name Saved by: Alyce Klingler-Castle Saved date: 06/13/97 5:49 PM
Pages: 36 Words: 4809 Template: c:\msoffice\templates\comm.dot
File Name Ch7.doc Part Number 270844-001
5. Press the two release latches 1 on the side of the bezel (at
the top and center of the bezel).
6. Partially swing the bezel away from the front of the
computer chassis, like a hinged door, and remove the bezel.
Removing the Front Bezel
Replacing the Front Bezel
To replace the front bezel, complete the following steps:
1. Line up the three slots on the right side of the bezel with
the sheet metal tabs on the front of the chassis.
2. Swing the bezel into place, like a hinged door, and press in
to secure the latches on the left side.
To Next Page
Loading...
