Reference Guide 7-5
Writer: Your Name Saved By: Alyce Klingler-Castle Saved Date: 06/13/97 5:49 PM
Pages: 36 Words: 4809 Template: c:\msoffice\templates\comm.dot
File Name Ch7.doc Part Number 270844-001
Removing the Front Bezel
To install optional drives, you must remove the front bezel to
gain access to the drive cage.
CAUTION:
Before removing the side panel and front bezel,
ensure that the computer is turned off and that the power cord is
disconnected from the electrical outlet.
To remove the front bezel, complete the following steps:
1. If you have locked the Smart Cover Lock, use Computer
Setup to unlock the lock.
For more information about Computer Setup, refer to
Chapter 8, “Using Compaq Utilities.”
2. Turn off the computer and any external devices.
3. Disconnect the power cord from the power outlet.
4. Remove the side panel.
To Next Page
Loading...
