6-22 Upgrading the Desktop Computer
Writer: Debbie Thomson Saved by: Alyce Klingler-Castle Saved date: 06/13/97 5:32 PM
Pages: 37 Words: 5251 Template: c:\msoffice\templates\comm.dot
File Name Ch6.doc Part Number 270844-002
Removing an
Expansion Board
To remove an expansion board, follow these steps:
1. Remove the expansion board cage.
2. Disconnect any cables attached to the expansion board.
3. Remove the screw at the side of the expansion slot.
4. Hold the board at each end and carefully rock it back and
forth until the connectors pull free from the slot. Be sure
not to scrape the board against other components.
Removing an Expansion Board
5. Store the board in antistatic packaging.
6. Install an expansion slot cover to close the open slot.
To Next Page
Loading...
