Reference Guide 6-7
Writer: Debbie Thomson Saved By: Alyce Klingler-Castle Saved Date: 06/13/97 5:32 PM
Pages: 37 Words: 5251 Template: c:\msoffice\templates\comm.dot
File Name Ch6.doc Part Number 270844-002
5. Press down on the release latch 1 at the lower left edge of
the bezel and swing the bezel out from the left.
6. Press down on the release latch 2 at the lower right edge of
the bezel and swing the bezel out from the right to remove
the bezel.
Removing the Front Bezel
Replacing the Front Bezel
To replace the front bezel, complete the following steps:
1. Line up the release latches at the top of the bezel with the
appropriate slots in the front of the chassis.
✎
Be sure to line up the diskette drive eject button with the
corresponding hole in the front bezel before snapping the
bezel in place.
2. Swing the bezel down and press in to secure the lower
release latches.
To Next Page
Loading...
