7-20 Upgrading the Minitower Computer
Writer: Your Name Saved by: Alyce Klingler-Castle Saved date: 06/13/97 5:49 PM
Pages: 36 Words: 4809 Template: c:\msoffice\templates\comm.dot
File Name Ch7.doc Part Number 270844-001
Removing an
Expansion Board
To remove an expansion board, follow these steps:
1. Remove the expansion board cage.
2. Disconnect any cables attached to the expansion board.
3. Remove the screw at the side of the expansion slot.
4. Hold the board at each end and carefully rock it back and
forth until the connectors pull free from the slot. Be sure
not to scrape the board against other components.
Removing an Expansion Board
5. Store the board in antistatic packaging.
6. Install an expansion slot cover over the open slot.
Installing a Speaker
in the Expansion
Board Cage
To install an optional speaker in the expansion board cage,
complete the following steps:
1. Remove the expansion board cage from the computer
chassis.
2. Slide the speaker under the metal tabs on the expansion
board cage.
To Next Page
Loading...
