Reference Guide 6-37
Writer: Debbie Thomson Saved By: Alyce Klingler-Castle Saved Date: 06/13/97 5:32 PM
Pages: 37 Words: 5251 Template: c:\msoffice\templates\comm.dot
File Name Ch6.doc Part Number 270844-002
3. Connect the power connector to the system board and to
any drives or other peripherals.
!
WARNING:
This equipment is designed for connection to a
grounded (earthed) outlet. The grounding type plug is an important
safety feature. To reduce the risk of electrical shock, damage to
your equipment, or loss of your data, do not disable this feature.
CAUTION:
Ensure that the voltage select switch is in the proper
position (115 or 230 VAC). Failure to do so will result in damage to
the equipment.
Installing an
External Infrared
Transceiver
To connect an external infrared transceiver to the computer,
follow these steps:
1. Locate the external infrared transceiver connector on the
back of the computer (yellow-colored icon).
2. Plug in the transceiver cable.
Connecting an External Infrared Transceiver
3. Follow the instructions provided in the transceiver kit to
install necessary software and to reconfigure your
computer to recognize the transceiver.
To Next Page
Loading...
