E-2 System Board Switches
Writer: Debbie Thomson Saved by: Troy Witte Saved date: 06/16/97 2:56 PM
Pages: 3 Words: 346 Template: c:\msoffice\templates\commapp.dot
File Name Appe.doc Part Number 270844-002
Switch Module and Location on Pentium II Based System Board
✎
To change the system board switch module, you must
remove the computer cover or side panel. For information
about removing the computer cover or side panel, refer to
Chapter 6, “Upgrading the Desktop Computer,” or
Chapter 7, “Upgrading the Minitower Computer.”
!
WARNING:
To reduce the risk of personal injury from hot
surfaces, allow the internal system components to cool before
touching.
Disabling and
Enabling the Power-
On Password
The computer is shipped with the power-on password feature
enabled. To disable the power-on password, set S1 on SW1 to
On.
To Next Page
Loading...
