Reference Guide F-1
Writer: Debbie Thomson Saved by: Debbie L. Thomson Saved date: 06/09/97 3:20 PM
Pages: 2 Words: 253 Template: c:\msoffice\templates\commapp.dot
File Name Appf.doc Part Number 270844-002
appendix
F
E
LECTROSTATIC
D
ISCHARGE
A discharge of static electricity from a finger or other conductor
may damage system boards or other static-sensitive devices.
This type of damage may reduce the life expectancy of the
device.
Preventing
Electrostatic
Damage
To prevent electrostatic damage, observe the following
precautions:
■
Avoid hand contact by transporting and storing products
in static-safe containers.
■
Keep electrostatic-sensitive parts in their containers
until they arrive at static-free workstations.
■
Place parts on a grounded surface before removing them
from their containers.
■
Avoid touching pins, leads, or circuitry.
■
Always be properly grounded when touching a static-
sensitive component or assembly.
Grounding Methods
There are several methods for grounding. Use one or more of
the following methods when handling or installing electrostatic-
sensitive parts:
■
Use a wrist strap connected by a ground cord to a grounded
workstation or computer chassis. Wrist straps are flexible
straps with a minimum of 1 Mohm +/- 10 percent resistance
in the ground cords. To provide proper ground, wear the
strap snug against the skin.
■
Use heelstraps, toestraps, or bootstraps at standing
workstations. Wear the straps on both feet when standing on
conductive floors or dissipating floor mats.
■
Use conductive field service tools.
■
Use a portable field service kit with a folding static-
dissipating work mat.
To Next Page
Loading...
