2-20 Understanding and Using Intelligent Manageability
Writer: Debbie Thomson Saved by: Debbie Thomson Saved date: 06/30/97 2:01 PM
Pages: 36 Words: 7459 Template: c:\msoffice\templates\comm.dot
File Name Ch2.doc Part Number 270844-002
To reattach the Smart Cover Lock, secure the lock in place with
the three tamper-proof screws.
Reattaching the Smart Cover Lock
QuickLock/QuickBlank
QuickLock/QuickBlank disables the keyboard and mouse
interface, and can blank the screen, without exiting application.
Enabling QuickLock and QuickBlank
To enable the QuickLock and QuickBlank features, complete
the following steps:
1. Turn on the computer.
2. When the F10 Setup message appears in the lower-right
corner of the Compaq logo screen, press the F10 key.
✎
If you do not press the F10 key while the message is
displayed, you must turn the computer off, then on again
to access the utility.
To Next Page
Loading...
