7-18 Upgrading the Minitower Computer
Writer: Your Name Saved by: Alyce Klingler-Castle Saved date: 06/13/97 5:49 PM
Pages: 36 Words: 4809 Template: c:\msoffice\templates\comm.dot
File Name Ch7.doc Part Number 270844-001
Removing an Expansion Slot Cover
To remove an expansion slot cover, follow these steps:
1. Remove the expansion board cage from the computer
chassis.
2. Locate the correct vacant slot in the expansion board cage.
3. Remove the screw at the side of the expansion slot, then
remove the expansion slot cover from the slot as illustrated
below.
Removing the Screw and Expansion Slot Cover
Installing an Expansion Slot Cover
To install an expansion slot cover, follow these steps:
1. Slide the expansion slot cover into place over the slot
opening.
2. Install the screw at the side of the expansion slot to secure
the slot cover.
Installing a PCI or ISA Board
To install a PCI or ISA expansion board, complete the following
steps:
1. Remove the expansion board cage from the computer
chassis.
2. Remove the expansion slot cover.
To Next Page
Loading...
