Reference Guide 6-1
Writer: Debbie Thomson Saved By: Alyce Klingler-Castle Saved Date: 06/13/97 5:32 PM
Pages: 37 Words: 5251 Template: c:\msoffice\templates\comm.dot
File Name Ch6.doc Part Number 270844-002
chapter
6
U
PGRADING THE
D
ESKTOP
C
OMPUTER
This chapter explains how to remove the computer cover and
install the following optional, upgrade equipment:
■
Additional memory
■
Expansion board
■
Optional drive
■
External infrared transceiver
This chapter also includes information about when to
reconfigure the computer to ensure that it recognizes the newly
installed equipment.
Installation
Sequence
To familiarize you with the process, a summary of the
installation and configuration sequence begins this chapter. It is
very important that you follow this sequence of steps to ensure
the proper installation of any optional equipment.
1. If you have locked the Smart Cover Lock, use Computer
Setup to unlock the lock.
For more information about Computer Setup, refer to
Chapter 8, “Using Compaq Utilities.”
2. If the computer is already on, turn it off and disconnect the
power cord from the wall outlet.
To Next Page
Loading...
