6-30 Upgrading the Desktop Computer
Writer: Debbie Thomson Saved by: Alyce Klingler-Castle Saved date: 06/13/97 5:32 PM
Pages: 37 Words: 5251 Template: c:\msoffice\templates\comm.dot
File Name Ch6.doc Part Number 270844-002
5. Install the drive in the desired drive bay and secure the
drive with two screws through the side of the drive cage.
✎
Be sure the guide screw lines up with the guide slot in the
drive cage.
Aligning the Guide Screw and Installing an Optional 5.25-Inch Drive
6. Connect the drive power 1 and signal 2 cables and, if it is
a CD-ROM drive or PD-CD Drive, connect the audio cable
3. The other end of the audio cable 3 should be connected
to P4 on the system board.
Connecting the Drive Cables
To Next Page
Loading...
