Reference Guide 6-33
Writer: Debbie Thomson Saved By: Alyce Klingler-Castle Saved Date: 06/13/97 5:32 PM
Pages: 37 Words: 5251 Template: c:\msoffice\templates\comm.dot
File Name Ch6.doc Part Number 270844-002
✎
Some options use M3 metric thread hardware. Extra guide
screws are provided on the front of the chassis, under the
front bezel. The Compaq-supplied metric screws are
black.
6. Install the bracket and drive into the desired drive bay and
secure the bracket with two screws through the side of the
drive cage.
✎
Be sure the guide screw lines up with the guide slot in the
drive cage.
Aligning the Guide Screw and Installing a Bracket with a 3.5-Inch Drive
To Next Page
Loading...
