Compaq Armada 1500 - Resolving a Low-Battery Condition

Learning About Battery Packs 3-7
Writer: Lorize Fazio Saved by: Johnnie Abercrombie Saved date: 10/07/97 4:15 PM
Part Number: 284809-003 File name: Ch03.doc
Removing Battery Pack from the DualBay
To remove a battery pack from the DualBay, follow these steps:
1. Pull down on the battery pack release latch
1
to release the
battery from the DualBay.
2. Remove the battery pack from the DualBay
2
.
Removing a Battery From the DualBay
Resolving a Low-Battery Condition
When you operate the computer on battery power and the battery
charge runs low, the computer beeps (unless warning beeps have
been disabled) and the battery charge light begins to blink. These
signs indicate a low-battery or critical low-battery condition.
Resolve these conditions with a fully charged battery pack or
external power.
When a low-battery condition is reached, the computer beeps five
times and the battery charge light blinks once per second. When a
critical low-battery condition is reached, the battery charge light
blinks twice per second.