Compaq Armada 1500 - Power-On Password

4-2 Setting Security Features
Writer: Rebecca Wiggins Saved by: Johnnie Abercrombie Saved date: 10/07/97 4:58 PM
Part Number: 284809-003 File name: Ch04.doc
Passwords Properties lets you set the following:
If you want: Click this tab:
Initial setting of power-on
password; enabling of QuickLock
and QuickBlank
Computer Security
CAUTION:
If you forget your power-on password, the computer
must be disassembled and the memory cleared. If you forget your
setup password, the password must be cleared from memory before
you can reconfigure the computer. Call your Compaq authorized
dealer or service provider for assistance if you forget your passwords.
Power-On Password
Power-on password is a security feature that prevents use of the
computer when it is turned on until a secret word or code is
entered. This prevents unauthorized access to your information.
Once you establish a power-on password, you must enter it each
time you turn on the computer.
Establishing a Power-On Password
To establish your power-on password, follow these steps:
1. Click the Computer Security tab in the Passwords icon.
2. Click the Set button.
3. Enter your password twice, then click OK. You may enter up to
seven alphanumeric characters for the password. The next time
you restart the computer, you will be prompted to enter your
power-on password.
4. Shut Down or restart the computer to allow the password to
take effect. The next time you restart the computer, you will be
prompted to enter your power-on password.
IMPORTANT:
Type carefully, because the password does not
display as you type it. The password is not case-sensitive.
However, you must use the same keys each time you enter the
password. For example, the numbers at the top of the keyboard are
not recognized as being the same as the numbers in the embedded
numeric keypad.