Connecting External Equipment 6-3
Writer: Lorise Fazio Saved by: LFazio Saved date: 10/03/97 11:49 AM
Pages: 6 Words: 933 Template: t:\template\ref\ref.dot
Part Number: 284809-003 File name: Ch06.doc
NOTE:
The internal modem supports specific countries that are
included in the selection list of the country selection application.
In Windows 95, to change the country selection setting, follow
these steps:
1. Click Start, point to Settings, Control Panel.
2. Double-click the System icon. From the System Properties
window, click the Device Manager tab.
3. Double-click the modem icon, then double-click your modem.
4. Click the Country Setting for Modem tab, then select the
country from the List of Countries.
5. Click the Change Country button.
6. Click Yes to confirm your country selection, then click OK.
In Windows NT, to change the country selection setting, follow
these steps:
1. Click Start, point to Settings, Control Panel.
2. Double-click the CSA Control Panel.
3. Select the country from the List of Countries.
4. Click the Change Country button.
5. Restart the computer to confirm the modem setting for the new
country.
Using Communications Software
You need communications software to operate the modem. This
software issues commands to the modem affecting settings such as
the modem connection speed, the number of rings before
answering the telephone, the delay before listening for a dial tone,
or the phone number to dial.
There is a wide range of communications software available that
can be used with your modem for tasks such as accessing another
computer or the Internet from a remote location. Refer to the
documentation that comes with the communications software.
Contact your Compaq authorized dealer, reseller, or service
provider for a complete list of communications software
applications.
To Next Page
Loading...
Need help?
General
