5-8 Removable Drives & Upgrades
Writer: Rebecca Wiggins Saved by: Rebecca Wiggins Saved date: 10/07/97 11:17 AM
Part Number: 284809-003 File name: Ch05.doc
6. Remove the existing memory board by pulling the metal
spring retention tabs
1
(on each side of the memory board)
away from the board to release it. The memory board will pop
out.
7. Gently slide out the memory board at a 45 degree angle
2
.
IMPORTANT:
To protect the connectors on the memory board,
remove the board at a 45 degree angle. Do not pull the board
straight up.
Removing the Memory Board
To Next Page
Loading...
