Compaq ArmadaStation - Page 102

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ArmadaStation Removal and Replacement Procedures
5-49
NOTE: The C/U actuator assembly should not be disassembled during removal and
installation of the control panel assembly. However, if it should be removed, refer to
Figure 5-47 for the proper position of the security actuator
1
, torsion spring
2
, and
MultiBay security arm
3
.
Figure 5-47.
Proper Position of the C/U Actuator Assembly