Compaq ArmadaStation - Page 71

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-18
ArmadaStation Removal and Replacement Procedures
4. Remove the screws from the sides of the half-height drive (Figure 5-17).
NOTE: The half-height drive should have two screws installed in each side. If these
screws are missing, appropriate-sized screws must be obtained to secure the
half-height drive to the drive cage shield.
Figure 5-17.
Removing the Half-Height Drive Screws