5-8 Chapter 5, Error Messages and Codes
Addendum 108431-001 (11-88) to
Manual No. 108033-003
Table 5-2. Advanced Diagnostics Error Codes Continued
Error
Code Description
Recommended
Action
111-01 Refresh detect test failed. Replace the system board and retest for error codes
103-xx through 113-xx.
112-01 Speed test slow mode out of range.
112-02 Speed test mixed mode out of range.
112-03 Speed test fast mode out of range.
112-04 Speed test unable to enter slow mode.
112-05 Speed test unable to enter mixed mode.
112-06 Speed test unable to enter fast mode.
112-07 Speed test system error.
112-08 Speed test unable to enter auto mode.
112-09 Speed test unable to enter high mode.
112-10 Speed test high mode out of range.
112-11 Speed test auto mode out of range.
112-12 Speed test variable speed mode
inoperative.
113-01 Protected mode test failed.
114-01 Speaker test failed. 1. Verify the speaker connection.
2. Replace the speaker and retest.
3. Replace the system board and retest.
199-00 Installed devices test failed. 1. Check system configuration.
2. Verify cable connection.
3. Check switch settings.
4. Run SETUP.
5. Replace the system board and retest.
Continued...
To Next Page
Loading...
