4-4 Chapter 4, Advanced Diagnostics Program
Addendum 108431-001 (11-88) to
Manual No. 108033-003
4.3 ADVANCED DIAGNOSTICS
PROGRAM
System Test Menu
When running the diagnostic tests, the program
allows you to:
□ Run the tests once in an interactive mode
□ Run the tests multiple times in a looping
mode
□ Select the Test Logging Utilities Menu
Test Logging Utilities Menu
This selection allows you to:
□ Log detected errors to a printer. When this
feature is turned ON, all error messages are
written to the printer.
□ Display the test log. When selected, it lists
the devices tested, the number of test passes
completed, and any errors encountered.
□ Print the test log. When the test log is
printed, it lists the devices installed and
how many test passes have been completed
on the various devices. Additionally, any
errors encountered during testing are
printed.
To Next Page
Loading...
