Compaq DESKPRO 386 - Removing the ESDI Fixed Disk Drive; Controller Board Signal Cables; Removing the Multipurpose Fixed Disk Drive

Maintenance and Service Guide 7-21
5. Remove the retaining screw that secures
the expansion board to the chassis.
6. Disconnect any signal cables attached to
the expansion board (Figures 7-22, 7-23, 7-24).
Figure 7-22. Removing the ESDI Fixed Disk Drive
Controller Board Signal Cables.
Figure 7-23. Removing the Multipurpose Fixed Disk Drive
Controller Board Signal Cables.