7-40  Chapter 7, Removal and Replacement Procedures 
Addendum 108431-001 (11-88) to 
Manual No. 108033-003
2.  Locate and disconnect the universal power 
cables, battery connector, monitor power 
connector, and power supply connector 
from the system board (Figures 7-42 and 
7-43).
Figure 7-42. Location of the Power Cable Connectors, Battery Connector, Monitor Power Connector, and Power Supply  
Connector on the COMPAQ DESKPRO 386 System Board Version 1 (assy. no. 000401).