Compaq DESKPRO 386 - Memory Chip(S)

7-26 Chapter 7, Removal and Replacement Procedures
7.13 MEMORY CHIP(S)
Memory chips can be installed on the 32-bit
system memory board, 1- to 2-megabyte 32-
bit memory expansion board, 4- to 8-megabyte
32-bit memory expansion board, and .5- to
2-megabyte 16-bit memory expansion board. Use
a memory chip removal tool and a memory chip
insertion tool for these procedures.
To remove a memory chip, follow these steps:
1. Complete the removal procedures in the
following sections:
1. Complete the removal procedures in the
following sections:
a. 7.2 MONITOR
b. 7.3 KEYBOARD
c. 7.5 PREPARING THE SYSTEM UNIT
FOR THE INTERNAL REMOVAL
AND REPLACEMENT PROCEDURES
d. 7.6 SYSTEM UNIT COVER AND
INTERNAL CONFIGURATION
e. 7.10 EXPANSION BOARD(S). Remove
only the 32-bit system memory
board.
f. 7.12 MEMORY EXPANSION BOARD(S).
If applicable.