Compaq DESKPRO 386 - Removing the 32-Bit Memory Expansion Board; From the 32-Bit System Memory Board

Maintenance and Service Guide 7-25
2. Remove the five mounting screws holding
the memory expansion board to the 32-bit
system memory board.
3. Gently pull the memory expansion board
away from the 32-bit system memory
board, and set the memory expansion
board aside (Figure 7-27).
To replace a memory expansion board, reverse
Steps 1 through 3 of the preceding removal
procedures.
Figure 7-27. Removing the 32-Bit Memory Expansion Board
from the 32-Bit System Memory Board.