7-2 Chapter 7, Removal and Replacement Procedures
7.2 MONITOR
The following procedures apply to the COMPAQ
Dual-Mode, COMPAQ Color, COMPAQ Video
Graphics Monochrome, or COMPAQ Video
Graphics Color Monitor.
1. Turn OFF the computer.
CAUTION
The system unit power should be OFF prior
to disconnecting the monitor cables.
2. If the monitor has an ON/OFF switch on
the front or right side, place the ON/OFF
switch in the OFF position.
3. Study Figures 7-1, 7-2, 7-3, and 7-4 to
locate the monitor power and signal
cables.
Figure 7-1. COMPAQ Dual-Mode Monitor (Installed).
Addendum 108431-001 (11-88) to
Manual No. 108033-003
To Next Page
Loading...
