Compaq DESKPRO 386 - Memory Configuration for Jumper Settings; Memory Expansion Board

Maintenance and Service Guide 8-9
Table 8-6. Jumper Settings for
the .5- to 2-Megabyte 16-Bit
Memory Expansion Board
Jumper
Selection Function
E1 to E2, E4 to E5 Base address of 4
megabytes selected
(default)
E1 to E2, E5 to E6 Base address of 6
megabytes selected
E2 to E3, E4 to E5 Base address of 10
megabytes selected
E2 to E3, E5 to E6 Base address of 12
megabytes selected
Table 8-7. Memory Configuration
for Jumper Settings E1-E2 and E5-E6
for the .5- to 2-Megabyte 16-Bit
Memory Expansion Board
Banks
Installed
Resulting
Expansion Memory
Bank 1 512 Kbytes
Banks 1 and 2 1 megabyte
Banks 1, 2, and 3 1.5 megabytes
Banks 1, 2, 3, and 4 2 megabytes