xxi
8-7. Memory Configuration for Jumper Settings
E1-E2 and E5-E6 for the .5- to 2-Megabyte 16-Bit
Memory Expansion Board
8-9
8-8. Jumper Settings for the 1- to 2-Megabyte or 4- to
8-Megabyte 32-Bit Memory Expansion Boards
8-11
8-9. Jumper Settings for the ESDI Fixed Disk Drive
Controller Board (assy. no. WD1005WAH)
8-13
8-10. Shunt Jumper and Switch Settings for the
Multipurpose Fixed Disk Drive Controller Board
(assy. no. 000336-001 and -021)
8-15
8-11. Switch Settings for the Multipurpose Fixed Disk Drive
Controller Board (assy. no. 000519 and 000815)
8-17
8-12. Jumper Settings for the Fixed Disk Drive Controller
Board (assy. no. WD1002WAH)
8-19
8-13. Switch Settings for the Host Adapter Board 8-21
8-14. SW1 Settings for the COMPAQ Enhanced Color
Graphics Board as the Only or Primary Video
Display Controller Board
8-24
8-15. SW1 Settings for the COMPAQ Enhanced Color Graphics
Board as the Secondary Video Display Controller Board
8-25
8-16. SW2 Settings for the COMPAQ Enhanced
Color Graphics Board
8-26
8-17. Jumper Settings for the Video Display Controller Board
(assy. no. 000031, 000160, and 000345)
8-28
8-18. Jumper Settings for the Video Display Controller Board
(assy. no. 000525)
8-30
8-19. Jumper Setting for the COMPAQ Video Graphics
Controller Board
8-31
8-20. Asynchronous Communications/Parallel Printer
Board Switch Settings
8-33
To Next Page
Loading...
