2-2 l Des cri pt io n
What is the MDCW Carousel Plus
Dryer?
The MDCW Carousel Plus Dryer is a self-contained, mobile unit designed to dry
plastic resin and convey it with dehumidified air directly to a processing machine.
This mobile unit contains:
• A mobile dehumidifying dryer
• Drying hopper with a material distribution box
• Conveying blower and filter
• Direct feed machine loader with a demand sensor
• Hopper loader (with self-loading option)
• Quick disconnect conveying hoses
The dryer produces hot, low dewpoint air that removes moisture from hygroscopic
plastics. When the conveying function is turned on, the conveying blower conveys
the dried resin to the machine loader mounted on the processing machine. The
demand sensor on the machine loader viewing chamber allows you to convey just
enough material to satisfy the shot size required for your process.
Optional Self-Loading MDCW
The self-loading option on the MDCW Carousel Plus Dryer allows the conveying
blower to convey new material from the material source into the drying hopper on
the MDCW. This option is in addition to the standard conveying capability on an
MDCW, which is conveying material to the machine from the drying hopper. This
option allows the MDCW to be a totally self-contained system with a common
control.
To Next Page
Loading...
Need help?
General
