CAUTION: The list of data that may be read and written to by the user is arranged
in a specific location (parameters 500 to 540). Writing to a location with improper
data, or writing to an incorrect location outside of the specified range may cause
your common controls system to become inoperative or to operate in a manner
that may damage your process. Be certain that you understand each parameter
and its effect before changing anything. Conair recommends that you initially
attempt to read from the registers and do not attempt any writes. Once the infor-
mation you are trying to read has been confirmed as accurate, you can program
your new/additional data.
A
Modbus
Using the Modbus Parameter List
(continued)
Modbus Communic ations l A-3
To Next Page
Loading...
Need help?
General
