Supported Dryer SPI Commands
(continued)
6. Status, Process - Indicates that the status of the process with each “bit” showing
a particular condition.
The “bits” are defined as follows:
Bit 0 - Processing (dryer running)
Bit1 - Alarm, System (any alarm that indicates a problem that may affect the dry-
ing operation)
Bit3 - Alarm, Machine (any alarm that indicates a problem with the dryer itself)
Bit4 - Alarm, High Temperature Deviation
Bit5 - Alarm, Low Temperature Deviation
Bit6 - Reserved
Bit7 - Reserved
Bit8 - Alarm, Filter clogged
Bit9 - Alarm, Low flow
Bit10 - Alarm, High Dewpoint
Bit11- Reserved
Bit12 - Reserved
Bit13 - Reserved
Bit14 - Temperature out of band deviation
Bit15 - Not used
Select: NA Poll: 20h, 40h
(continued)
D
SPI
SPI Communica tions l D-5
To Next Page
Loading...
Need help?
General
