Conair MDCW Carousel Plus W15 User Manual

D
SPI
SPI Communica tions l D-7
Supported Dryer SPI Commands
(continued)
8. Status, Machine 2 - This word shows the status of the Dryer itself with each bit
showing a particular condition.
The “bits” are defined as follows:
Bit0 - Processing (dryer running)
Bit1 - Alarm, System (any alarm that indicates a problem that may affect the
drying operation)
Bit2 - Alarm, Process (any alarm that indicates a problem with the process itself)
Bit3 - Alarm, Machine (any alarm that indicates a problem with the dryer itself)
Bit4 - Fault Sensor
Bit5 - Fault, Calibration
Bit6 - Reserved
Bit7 - Reserved
Bit8 - Reserved
Bit9 - Reserved
Bit10 - Reserved
Bit11 - Reserved
Bit12 - Reserved
Bit13 - Reserved
Bit14 - Reserved
Bit15- Reserved
Select: NA Poll: 20h, 44h
(continued)

Conair MDCW Carousel Plus W15 Specifications

General

Brand	Conair
Model	MDCW Carousel Plus W15
Category	Dryer
Language	English