Function
4-24 l Operati on
Control Function Descriptions(continued)
Screen
SCREEN 56
SCREEN 57
MONDAY START TIME
ON 8:00 AM
MONDAY STOP TIME
ON 8:00 PM
This is the auto start screen for the first
day of the week. Each day has a screen
similar to this. By pressing the Select
Category button under On or Off, the dryer
can be set to start on Monday. The start
time can be set by pressing the Select
Category button under time and entering a
new time on the numeric keypad. The AM
/ PM can be changed only after a time
value has been entered. The (+) button
will set PM and the (-) button will set AM.
The “ENTER” key must be pressed to
lock in the new time. The dryer can be
manually started at anytime. If the auto
start time runs out and the dryer has been
manually started, nothing will happen.
This is the auto stop screen for the first day
of the week. Each day has a screen similar
to this. By pressing the Select Category
button under On or Off, the dryer can be
set to stop on Monday. The stop time can
be set by pressing the Select Category but-
ton under time and entering a new time on
the numeric keypad. The AM / PM can be
changed only after a time value has been
entered. The (+) button will set PM and
the (-) button will set AM. The “ENTER”
key must be pressed to lock in the new
time. If the auto stop time runs out and the
dryer has already been manually stopped,
nothing will happen. If the dryer was auto
started on Monday morning and the
Monday auto stop is set to off, the dryer
will continue running until it hits a day of
the week when the auto stop is set to On,
at that time the dryer will turn off.
NOTE: If you purchased the
DM-II (Drying Monitor Option),
there will be additional screens
present in this area. See the
DM-II Appendix for information
pertaining to the control func-
tion descriptions for the DM-II.
✐
To Next Page
Loading...
Need help?
General
