Screen
SCREEN 14
SCREEN 15
SCREEN 16
DRYER PROCESS
STATUS SCREEN
This is a column title screen. To navigate
to screens within a column (reference the
flow charts beginning on Page 4-4), the
operator must use the scroll buttons,
“Prev” and “Next”. The “Next” button
will scroll one screen at a time down a list
of screens. Once the last screen in the list
is displayed the “Next” button will return
the operator back to this Title screen.
When the “Prev” button is pressed, it will
scroll one screen at a time up the list of
screens. Once the title screen is displayed
the “Prev” button will go up to the next
high screen, in this case the Dryer Status
screen 13.
This is an example of a Heater Output
screen. It displays the actual percentage
output of the heater, which can also be
interpreted as the percentage on time. The
on time can be checked by looking at the
heater LEDs in the Dryer Status section of
the display.
The screen shows the process protection
actual temperature measured at the process
heater outlet.
PROCESS HEATER
OUTPUT 100%
Function
4-14 l Oper a tion
Control Function Descriptions(continued)
When supplied for
central drying appli-
cations, this function
is not available.
PROCESS PROTECTION
ACT 350°F
To Next Page
Loading...
