7
THE FOLLOWING SAFETY INSTRUCTIONS SHOULD BE
ADHERED TO AT ALL TIMES. PRACTICE SAFETY FIRST.
INSTALLATION SAFETY TIPS
The following safety installation tips must always be followed. Please read and
understand this entire manual before installing the unit and carefully follow all
procedures.
1) Proper, safety-approved protection for your head, eyes, hands, and feet should be worn
during all phases of the installation.
2) Use extreme caution while raising the elevator components into position to avoid personal
injury or damage to the equipment.
3) Use extreme care when operating units without panels in place to avoid personal injury
from moving parts.
4) Power should be removed from the drive unit and operating systems when any electrical
work or adjustments are being done.
5) To avoid possible electrical shock, you should not work on a wet floor or enter an elevator
or elevator pit when it contains water.
6) Use only recommended anchor fasteners.
7) Never work alone and always be aware of fellow workers and their safety.
8) Do not wear loose-fitting clothing during installation. Shirt cuffs should be buttoned to
avoid being caught in moving machinery.
9) Ensure that all electrical and mechanical equipment is properly enclosed.
10) Never place yourself in a position where you may be harmed (i.e., between shear points,
under heavy objects, in the path of moving parts, etc.).
11) Never stand directly under the cab or inside the hoistway during testing or when power is
being supplied to the cab itself.
12) Shaft doors should be locked or nailed shut any time the area is left unattended.
13) Always remember and practice, SAFETY FIRST.
IT IS RECOMMENDED YOU READ AND FULLY
UNDERSTAND THIS MANUAL BEFORE BEGINNING THE
INSTALLATION OF THE ELEVATOR.
To Next Page
Loading...