2
INTRODUCTION
This manual contains installation and service instructions for the CONCORD HORIZON
ELEVATOR. We have spent much time and effort ensuring these instructions provide for a
safe and efficient installation. Please follow these instructions exactly and call us immediately
if you have any problems or need assistance.
Please be certain you follow our installation instructions and do not try to "cut any corners,”
eliminate any installation steps or modify the HORIZON ELEVATOR. It is important for your
customer's safety that the installation is thorough and correct. The best way to ensure this
margin of safety is by following our installation instructions.
Give the type of installation and any special requirements careful consideration. Consider how
the elevator is to be run, taking the operator's needs into account.
NOTE
The Concord HORIZON ELEVATOR is manufactured in the plant according to order
dimensions. Any preparatory work such as finishing electric source, pouring concrete base or
pit, or carpentry, should be done before the unit is installed.
The concept of the "INSTALLATION" section of this manual is to provide installation
procedures for the installation of a standard HORIZON.
HELP LINE
If you have any questions that are not covered in this manual, please contact our Technical
Support Department for assistance.
CONCORD ELEVATOR INC.
107 Alfred Kuehne Blvd.
Brampton, Ontario, Canada. L6T 4K3
Telephone: (905) 799-5484
U.S. Toll Free: (800) 791-7999
Fax: (905) 791-2222
THIS SAFETY ALERT SYMBOL INDICATES AN IMPORTANT
SAFETY MESSAGE IN THIS MANUAL. WHEN YOU SEE THIS
SYMBOL, CAREFULLY READ THE MESSAGE AND BE ALERT
TO THE POSSIBILITY OF CAUSING DAMAGE TO EQUIPMENT
AND/OR PERSONAL INJURY.
To Next Page
Loading...