7. BIOS Setup
74
PC-686BX(NLX)-LV, PC-686BX(NLX)-LVV
Doze Mode
Setting "Enabled" reduces the CPU clock speed if the system remains inactive for
longer than a specified time. However, other devices continue to operate at full
speed.
Standby Mode
Setting "Enabled" halts the fixed disk drive and video if the system remains inactive
for longer than a specified time. However, other devices continue to operate at full
speed.
Suspend Mode
Setting "Enabled" halts all devices other than the CPU if the system remains inactive
for longer than a specified time.
HDD Power Down
Setting "Enabled" turns off the power to the hard disk drive if the system remains
inactive for longer than a specified time.
However, other devices continue to remain active.
Throttle Duty Cycle
When the system enters sleep mode, the CPU clock only operates intermittently.
Selection options: 12.5%, 25.0%, 37.5%, 50.0%, 62.5%, 75.0%
PCI/VGA Act-Monitor
Enabling this setting restarts the global timer for standby mode when video goes
active.
Selection options: Enabled, Disabled
To Next Page
Loading...