Dinverter
A
Issue code: d2au9
Declaration of Conformity
Control Techniques plc,
The Gro, Newtown, Powys, UK, SY16 3BE
DIN1220025A DIN1220037A DIN1220055A DIN1220075A
The AC variable speed drive products listed above have been designed and
manufactured in accordance with the following European harmonized,
national and international standards:
EN60249 Base materials for printed circuits
IEC326-1 Printed boards: general information for the specification writer
IEC326-5 Printed boards: specification for single- and double-sided printed boards with
plated-through holes
IEC326-6 Printed boards: specification for multilayer printed boards
IEC664-1 Insulation co-ordination for equipment within low-voltage systems: principles,
requirements and tests
EN60529 Degrees of protection provided by enclosures (IP code)
UL94 Flammability rating of plastic materials
UL508C Standard for power conversion equipment
EN50081-1 Generic emission standard for the residential, commercial and light industrial
environment
EN50081-2 Generic emission standard for the industrial environment
EN50082-2 Generic immunity standard for the industrial environment
EN61800-3 Adjustable speed electrical power drive systems – Part 3: EMC product standard
including specific test methods
This product complies with the Low Voltage Directive 73/23/EEC, the
Electromagnetic Compatibility (EMC) Directive 89/336/EEC and the
CE Marking Directive 93/68/EEC.
W. Drury
Technical Director
Newtown
Date: 22nd January 1997
These electronic Drive products are intended to be used with an appropriate motor,
controller, electrical protection components and other equipment to form a complete
end product or system. The Drive must be installed only by a professional assembler
who is familiar with requirements for safety and electromagnetic compatibility (EMC).
The assembler is responsible for ensuring that the end product or system complies
with all the relevant laws in the country where it is to be used. Refer to this User
Guide or the Dinverter A EMC Data Sheet for further information on EMC
standards complied with by the product, and for guidelines on installation.
To Next Page
Loading...
Need help?
General
