Dinverter
A
User Guide
Issue code: d2au9
These functions are controlled by entering specific values. In some cases,
the Drive must be reset to make the function take effect. The values and
functions are shown in Table 5–1.
Table 5–1 Functions of the settings of parameter .00
No. Function Reset
required
149 Unlock standard security No
533 Reset parameters to their default values for 50Hz AC supply frequency Yes
544 Reset parameters to their default values for 60Hz AC supply frequency Yes
800 Lock standard and user security No
900 Save new parameter-values Yes
These functions are described in the appropriate sections later in
this chapter.
Display and keypad
The display and keypad are used for the following:
Reading and changing parameter values
Displaying the operating status of the Drive
Displaying fault and trip codes
Display
Programming keys
Control keys
Figure 5–1 Display and keypad as seen when the AC supply is connected to
the Drive